LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Parking Assistance Systems) >> Diagnostic Information and Procedures >> DTC B096B >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Advanced Park Assist Switch parameter changes between Active and Inactive while pressing and releasing the parallel park assist switch.
    • If the parameter does not change between Active and Inactive 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter change between Active and Inactive 
  3. All OK.
scientia non olet · About LEMON Manuals