LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Parking Assistance Systems) >> Diagnostic Information and Procedures >> DTC B0967 or B0968 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

The parking assist can be enabled/disabled by pressing the parking assist switch. If the parking assist is enabled, engaging the reverse gear activates the parking assist feature. By subsequently pressing the parking assist switch the parking assist can be disabled.

The indicator in the parking assist switch shows the status of the parking assist. If the lamp is ON, parking assist is enabled.

The indicator and switch are connected to the Parking Assist Control Module.

scientia non olet · About LEMON Manuals