Conditions for Setting the DTC
B0954 01, B0955 01, B0956 01, B0957 01, B0958 01, B0959 01, B0960 01, B0961 01, B096C 01, or B096D 01
The parking assist control module has determined the voltage at the sensor circuit is high or the parking assist sensor is not grounded.
B0954 02, B0955 02, B0956 02, B0957 02, B0958 02, B0959 02, B0960 02, B0961 02, B096C 02, or B096D 02
The parking assist control module has determined the sensor signal circuit is shorted to ground
B0954 04, B0955 04, B0956 04, B0957 04, B0958 04, B0959 04, B0960 04, B0961 04, B096C 04, or B096D 04
The parking assist control module has determined the sensor signal circuit is open
B0954 06, B0955 06, B0956 06, B0957 06, B0958 06, B0959 06, B0960 06, B0961 06, B096C 06, or B096D 06
The parking assist control module has determined the sensor signal circuit is shorted to ground or open
B0954 08, B0955 08, B0956 08, B0957 08, B0958 08, B0959 08, B0960 08, B0961 08, B096C 08, or B096D 08
The parking assist control module has received an invalid signal.
B0954 18, B0955 18, B0956 18, B0957 18, B0958 18, B0959 18, B0960 18, B0961 18, B096C 18, or B096D 18
The parking assist control module has received a low signal amplitude.
B0954 21, B0955 21, B0956 21, B0957 21, B0958 21, B0959 21, B0960 21, B0961 21, B096C 21, or B096D 21
The parking assist control module determines no change in the position of an object while the vehicle is in motion.
B0954 22, B0955 22, B0956 22, B0957 22, B0958 22, B0959 22, B0960 22, B0961 22, B096C 22, or B096D 22
The parking assist control module determines no change in the position of an object while the vehicle is in motion.
B0954 3A, B0955 3A, B0956 3A, B0957 3A, B0958 3A, B0959 3A, B0960 3A, B0961 3A, B096C 3A, or B096D 3A
The parking assist control module determines the wrong sensor type is installed.
B0954 3B, B0955 3B, B0956 3B, B0957 3B, B0958 3B, B0959 3B, B0960 3B, B0961 3B, B096C 3B, or B096D 3B
The parking assist control module determines the sensor failed a self test.