Component Testing
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
You must perform the Circuit/System Testing before proceeding with Component Testing.
- Ignition/Vehicle Off, connect the EL 26792 Spark Tester to the appropriate T8 Ignition Coil.
- Engine Running.
- Verify the spark output of the T8 Ignition Coil.
- If no output or the output is weak
Replace the T8 Ignition Coil
- Go to next step: If the output is good
- If no output or the output is weak
- All OK.