Component Testing
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the Q13 Evaporative Emission Vent Solenoid Valve.
- Test for 10-30 Ω between the control circuit terminal B or 1 and the B+ circuit terminal A or 2.
- If not between 10-30 Ω
Replace the Q13 Evaporative Emission Vent Solenoid Valve.
- Go to next step: If between 10-30 Ω
- If not between 10-30 Ω
- All OK.