LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Controls And Fuel - 1.6L (LWC) - DTC P0243 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0340, P0341, P0365, or P0366 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

P0340, P0365 Condition 1 

Camshaft Position Sensor = No Signal - For greater than 5.5 s

Condition 2 

Camshaft Position Sensor = No Signal - For greater than 4 s - Starter is engaged.

Condition 3 

Camshaft Position Sensor = Less than 4 pulses - For greater than 3 s

Condition 4 

Camshaft Position Sensor = No Signal - During the first 2 engine revolutions.

Condition 5 

Camshaft Position Sensor = No Signal - During 200 engine revolutions.

P0341, P0366 Condition 1 

Camshaft Position Sensor = Less than 4 pulses - During 2 engine revolutions.

Condition 2 

Camshaft Position Sensor = Greater than 6 pulses - During 2 engine revolutions.

Condition 3 

Camshaft Position Sensor = Less than 398 pulses - Greater than 402 pulses - During 200 engine revolutions.

scientia non olet · About LEMON Manuals