LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Power Steering System) >> Repair Instructions >> Steering Linkage Inner Tie Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
  4. Remove the steering gear boot. Refer to Steering Gear Boot Replacement .
  5. GM2968098

    Remove the steering linkage inner tie rod (1), using the CH-50751  wrench.

scientia non olet · About LEMON Manuals