LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C0565 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC C0565 is not present.
    • If the DTC is present 
    1. Program the K43 Power Steering Control Module.
    2. Verify the DTC does not reset.
      • If the DTC does not resets, all OK.
      • Go to next step: If the DTC does reset
    3. Verify that the correct VIN is stored in all high speed GMLAN modules.
      • If the correct VIN is not stored in a module, follow the programming and setup procedures for the module.
      • Go to next step: If all modules have the correct VIN stored
    4. Replace the K43 Power Steering Control Module.
    • Go to next step: If the DTC is not present 
  2. All OK.
scientia non olet · About LEMON Manuals