LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C005B (NJ1) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC C005B is not set.
    • If DTC C005B is set 

      Program the K43 Power Steering Control Module.

    • Go to next step: If DTC C005B is not set 
  3. All OK.