Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- DTC P0101 - P0103, P0106 - P0108, P0171, P0172, P0174, P0175, P0201 - P0208, P0300 - P0308, P0401, P042E, P0716, P0717, P0722, P0723, P182E = Not set
- { P2715 }2-6 Clutch = Commanded Off
- Accelerator Pedal Position = Greater than 0.5%
- Accelerator pedal position signal = Valid
- Engine Speed = 400 to 7, 500 RPM
- { P2715 }Engine Torque = Greater than 45 Nm (33 lb ft)
- High Side Driver = Enabled
- Ignition Voltage = 9 to 32 V
- Transmission Fluid Temperature = Warmer than 7°C (20°F)
- Transmission Output Speed = Greater than 100 RPM
- { P2714 }Transmission Range Command = 2nd Gear or 5th Gear or 6th gear
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s