Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
P0815, P0816 Condition 1
- DTC P0815, P0816, P0826, P1761, P182E, P1876, P1877, P1915 = Not set
- Engine Speed. = 400 to 7, 500 RPM
- Greater than 1 s since last transmission shift operation.
- Ignition Voltage = 9 to 32 V
- Transmission = Park/Neutral or Reverse
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
Condition 2
- DTC P0815, P0816, P0826, P1761, P182E, P1876, P1877, P1915 = Not set
- Engine Speed = 400 to 7, 500 RPM
- Greater than 1 s since last transmission shift operation.
- Ignition Voltage = 9 to 32 V
- Transmission = Forward Gear
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P0826
- DTC P1761 = Not set
- Engine Speed = 400 to 7, 500 RPM
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s