Conditions for Running the DTC

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0101 - P0103, P0106 - P0108, P0171, P0172, P0174, P0175, P0201 - P0208, P0300 - P0308, P0401, P042E, P0716, P0717, P0722, P0723, P182E = Not set
Accelerator Pedal Position = Greater than 0.5%
Accelerator pedal position signal = Valid
{ P0751 }Commanded gear = 1st Gear
{ P0752 }Commanded gear = 3rd Gear
Engine Speed = 400 to 7, 500 RPM
Engine Torque Signal = Valid
High Side Driver = Enabled
Ignition Voltage = 9 to 32 V
Transmission = Not Shifting
Transmission Fluid Temperature = Warmer than -6.6°C (20.1°F)
Transmission Output Speed = Greater than 100 RPM

Frequency the DTC runs - After the running conditions are met - For greater than 5 s