Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
P0722
- DTC P0101 - P0103, P0121 - P0123, P0716, P0717, P0723 = Not set
- Accelerator Pedal Position = Greater than 8%
- Accelerator pedal position signal = Valid
- Engine Speed = 400 to 7, 500 RPM
- Engine Torque Signal = Valid
- Engine Torque = Greater than 30 Nm (22 lb ft)
- Ignition Voltage = 9 to 32 V
- Powertrain Braking Signal = Valid
- Transmission = ForwardorReverse
- Transmission Fluid Temperature = Warmer than -40°C (-40°F)
- Transmission Input Speed = 1, 000 to 8, 192 RPM
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P0723
- DTC P0101 - P0103, P0121 - P0123, P0973, P0974, P0976, P0977 = Not set
- Engine Speed = 400 to 7, 500 RPM
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P077C, P077D
- DTC P077C, P077D = Not set
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met