LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Exterior Trim) >> Repair Instructions >> Radiator Grille Emblem/Nameplate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2969096

    Clip in the 5 radiator grille emblem retainers (arrows) to install the radiator grill emblem (1).

  2. GM2969097

    Install the radiator grille opening cover (2) to the front bumper fascia (1). Lock 12 retaining clamps and snap-in noses.

  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals