Windshield Wiper Arm Replacement
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Windshield Wiper Arm Finish Cap Procedure Use a small flat-bladed tool to remove finish cap. |
| 2 | Windshield Wiper Arm Nut
CAUTION:
Refer to Fastener Caution . Tighten 28 N.m (21 lb ft) |
| 3 | Windshield Wiper Arm Procedure Use the wiper arm BO-49385 puller if the arm fails to release from the wiper motor pivot shaft. Special Tools BO-49385 Wiper Arm Puller For equivalent regional tools, refer to Special Tools . |