LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Parking Brake System) >> Diagnostic Information and Procedures >> DTC C056D >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC C056D 36 is not set.
    • If DTC C056D 36 is set 
    1. Program the K83 Parking Brake Control Module.
    2. Ignition ON.
    3. Apply and release the park brake.
    4. Verify the DTC is not set.
      • If the DTC is set, replace the K83 Parking Brake Control Module.
      • Go to next step: If the DTC is not set
    5. All OK.
    • Go to next step: If DTC C056D 36 is not set 
  3. Perform the Parking Brake Motor Reset procedure with a scan tool for the Parking Brake Control Module.
  4. Verify DTC C056D is not set.
    • If DTC C056D is set 

      Replace the K83 Parking Brake Control Module.

    • Go to next step: If DTC C056D is not set 
  5. All OK.
scientia non olet · About LEMON Manuals