Manual Shaft Detent (w/Shift Position Switch) Lever Assembly Removal
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Manual Shaft Detent (w/Shift Position Switch) Lever Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Manual Shaft Detent Lever Hub Pin
NOTE:
Use side cutter to remove the pin (1) and discard. |
| 2 | Manual Shift Shaft Pin
NOTE:
Discard the pin. It is not reusable. Special Tools
For equivalent regional tools, refer to Special Tools . |
| 3 | Manual Shaft |
| 4 | Manual Shaft Detent (w/Shift Position Switch) Lever Assembly |
| 5 | Park Pawl Actuator Assembly |