Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
CAUTION:
After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure.
CAUTION:
Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component. Preliminary Procedures
|
|
| 1 | 1 - 2 - 3 - 4 Clutch Spring Retainer Groove |
| 2 | 1 - 2 - 3 - 4 Clutch Piston Bore |
| 3 | Low and Reverse Clutch Spring Retainer Groove |
| 4 | Low and Reverse Clutch Piston Bore |
| 5 | Clutch Oil Passages |
| 6 | Air Bleed Passages |