LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 3-5-Reverse and 4-5-6 Clutch Housing Assemble (6T30/40/45/50 - Gen 2) >> Turbine Shaft Installation

Turbine Shaft Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM1891372
Turbine Shaft Installation

Callout Component Name
1 Turbine Shaft
2 Turbine Shaft Retaining Ring
Procedure 
Install a NEW retaining ring.
Special Tools 
GE-5586-A  Snap Ring Pliers or equivalent
Equivalent regional tools:Special Tools
scientia non olet · About LEMON Manuals