LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Primary Latch Release Cable Handle Replacement

Hood Primary Latch Release Cable Handle Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2026970
Callout Component Name
Preliminary Procedure 
Remove the front side door sill trim plate. Refer to Front Side Door Sill Trim Plate Replacement .
1 Hood Primary Latch Release Cable Handle

Procedure

  1. Pull down the hood primary latch release cable handle.
  2. To release the handle, pull down the cable and unhook from the handle.