Headlamp and Front Bumper Fascia Mount Panel Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the headlamps. Refer to Headlamp Replacement . Remove the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement . Remove the hood hold-open rod. Refer to Hood Hold-Open Rod Replacement . Remove the front end inflatable restraint discriminating sensor. Refer to Airbag Front End Discriminating Sensor Replacement . Remove the radiator upper bracket. Refer to Radiator Upper Bracket Replacement .
1	Headlamp and Front Bumper Fascia Mount Panel Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 15 N.m (12 lb ft)
2	Headlamp and Front Bumper Fascia Mount Panel

Callout

Component Name

Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
Remove the headlamps. Refer to Headlamp Replacement .
Remove the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement .
Remove the hood hold-open rod. Refer to Hood Hold-Open Rod Replacement .
Remove the front end inflatable restraint discriminating sensor. Refer to Airbag Front End Discriminating Sensor Replacement .
Remove the radiator upper bracket. Refer to Radiator Upper Bracket Replacement .

Headlamp and Front Bumper Fascia Mount Panel Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
15 N.m (12 lb ft)

Headlamp and Front Bumper Fascia Mount Panel