LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Fuel Tank Filler Pipe Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3947173
    NOTE:

    Always use a NEW fuel tank filler housing!

    Connect the electrical connector.

  2. Slightly rotate the fuel tank filler housing (1) for installation.
  3. Rotate the fuel tank filler housing into to correct end position.
  4. Ensure that the fuel tank filler housing is fully seated and all retaining tabs are locked.
  5. Fuel Tank Filler Door Replacement  - Install
scientia non olet · About LEMON Manuals