LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Lower Weatherstrip Replacement (Bonded) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4589339

    Unclip the 11 front side door lower weatherstrip retainers (1) from the front side door lower weatherstrip (2).

  2. Apply the primer PR03  from kit GL04/GL05  to the weatherstrip and the marked area on the vehicle.
  3. Bring the adhesive tape AD04 on to the front side door lower weatherstrip.
  4. GM4589340

    Install the front side door lower weatherstrip (1).

  5. Using the palm of the hand apply even pressure to the front side door lower weatherstrip to ensure full adhesion is made.
scientia non olet · About LEMON Manuals