LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Bolted Exterior Body Panels And Closures) >> Diagnostic Information and Procedures >> Hood Ajar Indicator/Message Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool body control module Hood Position parameter is Open with the hood open and Closed with the hood closed
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. All OK.
scientia non olet · About LEMON Manuals