LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Bolted Exterior Body Panels And Closures) >> Diagnostic Information and Procedures >> DTC P257D-P257F >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Hood Position parameter is Open when the hood is open and Closed when the hood is closed.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. All OK.