Circuit/System Description
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
The body control module applies B+ to the hood ajar signal circuit and monitors the voltage to determine the position of the hood. The hood ajar switch contains a resistor ladder. This resistor ladder will vary the voltage seen by the body control module by pulling down the applied voltage based on the position of the switch. The engine control module also monitors the hood ajar switch on vehicles equipped with KL9.