Rear Compartment Lid Latch Striker Replacement
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Rear End Trim Finish Panel Replacement . |
|
| 1 | Rear Compartment Lid Latch Striker Bolt[2x]
CAUTION:
Refer to Fastener Caution . Procedure Use a grease pencil to outline the striker before removing the bolts. Tighten 22N.m (16 lb ft) |
| 2 | Rear Compartment Lid Latch Striker
NOTE:
Adjust the rear compartment lid latch striker after replacing, if needed. |