Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Operate the component: S48A Multifunction Switch - Instrument Panel-Lock - Pressed
Verify the component works as specified: M97 Fuel Fill Door Lock Actuator = Locked
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component: S48A Multifunction Switch - Instrument Panel-Unlock - Pressed
Verify the component works as specified: M97 Fuel Fill Door Lock Actuator = Unlocked
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- All OK.