LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Power Door Lock System And Vehicle Access System) >> Diagnostic Information and Procedures >> DTC B3125, B3130, or B3135 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to:Power Door Locks Description and Operation 

Circuit Description
B+ - K9 Body Control Module Supplied from a fuse.
Control - Driver Door Unlock The output circuit is switched from ground to 12 V to activate the component.
Control - All Doors Lock The output circuit is switched from ground to 12 V to activate the component.
Control - Passenger Door Unlock The output circuit is switched from ground to 12 V to activate the component.
Ground - K9 Body Control Module Chassis Ground
Component Description
A23 Door Latch Assembly The door locks are actuated by a bidirectional DC motor that locks/unlocks the door so that it can not be opened from outside the vehicle (but still from inside).
K9 Body Control Module The control module also reads various switches and sensors and makes their values available via serial data.
scientia non olet · About LEMON Manuals