LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Turbocharger Oil Feed Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Drain the cooling system. Refer to Cooling System Draining and Filling .
  3. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  4. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  5. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  6. Remove the charge air cooler inlet air hose from the turbocharger. Refer to Charge Air Cooler Inlet Air Hose Replacement .
  7. Remove the turbocharger coolant return pipe from the turbocharger and hang aside. Refer to Turbocharger Coolant Return Pipe Replacement .
  8. GM2906666

    Remove and DISCARD the turbocharger coolant feed pipe clamp (6).

  9. Remove the turbocharger coolant feed pipe bolt (5).
  10. Remove the turbocharger coolant feed pipe hollow bolt (4) along with the 2 seal rings (1, 3).
  11. DISCARD the 2 seal rings.
  12. Remove the turbocharger coolant feed pipe (2)
  13. GM3405246
    NOTE:

    The turbocharger cooling feed pipe fitting is not reusable.

    Remove and DISCARD the turbocharger cooling feed pipe fitting (1).

  14. Remove and DISCARD the turbocharger cooling feed pipe fitting seal ring (2).
  15. GM2906668

    Remove and DISCARD the 2 clamps (2).

  16. Remove the turbocharger oil feed pipe (1).
  17. GM3405245

    Remove and DISCARD the 2 turbocharger oil feed pipe fitting (1)

  18. Remove and DISCARD the 2 turbocharger oil feed pipe fitting seal ring (2)
scientia non olet · About LEMON Manuals