LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Timing Chain Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper engine front cover. Refer to Engine Front Cover Replacement - Upper .
  2. GM2968108

    Push the timing chain guide - left side (2) in the direction of the arrow.

  3. Fix the tensioner (1) with 2 mm drill bit or equivalent (3).
  4. GM2968109
    NOTE:

    The timing components may move taking up slack as soon as the tensioner is removed. Timing integrity should be maintained at this point.

    Timing Chain Tensioner Bolt(2) - Remove[2x]

  5. Timing Chain Tensioner(1) - Remove
scientia non olet · About LEMON Manuals