LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3011733
    NOTE:

    Mind the installation position of the hydraulic valve lash adjuster.

    Lubricate the hydraulic valve lash adjusters with engine oil.

  2. Install the 16 hydraulic valve lash adjuster (1).
  3. Install the 16 hydraulic valve lash adjuster arms. Refer to Hydraulic Valve Lash Adjuster Arm Replacement .
scientia non olet · About LEMON Manuals