LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake camshaft. Refer to Intake Camshaft Replacement .
  2. Remove the exhaust camshaft. Refer to Exhaust Camshaft Replacement .
  3. GM3011732
    NOTE:

    Mind the installation position of the hydraulic valve lash adjuster arms.

    Remove the 16 hydraulic valve lash adjuster arms (1).

scientia non olet · About LEMON Manuals