LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3011732
    NOTE:

    Remember the installation position of the hydraulic valve lash adjuster arms.

    Lubricate the hydraulic valve lash adjuster arms with engine oil.

  2. Install the 16 hydraulic valve lash adjuster arms (1).
  3. Install the exhaust camshaft. Refer to Exhaust Camshaft Replacement .
  4. Install the intake camshaft. Refer to Intake Camshaft Replacement .
scientia non olet · About LEMON Manuals