LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Drive Belt Idler Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2906650

    Install the drive belt idler pulley (1).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the drive belt idler pulley bolt (2) and tighten to 25 N.m (18 lb ft).
  3. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals