LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft balancer absorber. Refer to Crankshaft Balancer Absorber Replacement .
  2. Place collecting basin underneath.
  3. GM2968029

    Remove the crankshaft front oil seal (1) from the engine front cover, using the EN-45000  remover (2).

scientia non olet · About LEMON Manuals