LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Camshaft Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injection fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Removal and Installation .
  2. Remove the oil dip stick.
  3. GM3011787

    Loosen the positive crankcase ventilation vacuum hose clamp (3).

  4. Remove the positive crankcase ventilation vacuum hose (2) from the camshaft cover (1).
  5. Unclip the charge air bypass valve hose and lay aside. Refer to Charge Air Bypass Valve Hose Replacement .
  6. GM2966415

    Remove the 3 engine control module wiring harness bracket nuts (1).

  7. Remove the engine control module wiring harness bracket (2).
  8. Remove the 2 turbocharger coolant return pipe bracket nuts (4).
  9. Remove the turbocharger coolant return pipe bracket (3).
  10. GM2966421
    NOTE:

    The bolts remain in the camshaft cover.

    Loosen the 23 camshaft cover bolts (1).

  11. GM2966422

    Remove the camshaft cover (1) along with the 23 bolts.

  12. GM2966428

    Remove and DISCARD the camshaft cover seal (1) from the camshaft cover.

scientia non olet · About LEMON Manuals