LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Transmission - Remove - Transmission Replacement .
  2. GM3137473

    Install the EN-652  holder (2), lock the automatic transmission flex plate via the starter ring gear.

  3. Automatic Transmission Flex Plate Bolt(1) - Loosen[8x]
  4. Remove the EN-652  holder (2).
  5. GM3137474

    Automatic Transmission Flex Plate Bolt(1) - Remove and DISCARD[8x]

  6. Automatic Transmission Flex Plate(2) - Remove
  7. GM2906641

    Crankshaft Position Reluctor Ring(1) - Remove

scientia non olet · About LEMON Manuals