LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Water Pump Inlet Pipe Installation

Water Pump Inlet Pipe Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2906695

    Install 2 NEW water pump inlet pipe seals (1, 2).

  2. Install the water pump inlet pipe (3).
  3. CAUTION:

    Refer to Fastener Caution .

  4. Install the water pump inlet pipe bolt (4) and tighten to 25 N.m (18 lb ft).