LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Turbocharger Oil Feed Pipe Removal

Turbocharger Oil Feed Pipe Removal

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2906668

    Remove and DISCARD the turbocharger oil feed pipe clamp (2) from the turbocharger oil feed pipe at the oil cooler housing.

  2. Remove and DISCARD the turbocharger oil feed pipe clamp (2) from the turbo charger oil feed pipe at the turbo charger.
  3. Remove the turbocharger oil feed pipe (1).
  4. GM3405245
    NOTE:

    The turbocharger oil feed pipe fittings are not reusable.

    Remove and DISCARD the 2 turbocharger oil feed pipe fittings (1)

  5. Remove and DISCARD the 2 turbocharger oil feed pipe fitting seal rings (2)
scientia non olet · About LEMON Manuals