Oil Pan Installation
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Clean the sealing surfaces.
- Apply approximately a 3 mm (0, 12 in) thick bead of oil pan sealant (1) to the oil pan. Refer to Adhesives, Fluids, Lubricants, and Sealers for the recommended sealant.
Install the oil pan (2) to lower crankcase.
- Install the 13 oil pan bolts (1) to the lower crankcase and tighten to 10 N.m (89 lb in). Mind the different bolt length.
NOTE:
The assembly time, including torque check, must take no longer than 10 minutes.
CAUTION:
Refer to Fastener Caution .