LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Exhaust Camshaft Removal

Exhaust Camshaft Removal

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3213236

    Remove the 4 camshaft bearing rear cap bolts (1).

    2. NOTE:

    Release the bearing support by striking it gently with a plastic hammer.

  2. Remove the camshaft bearing rear cap (2).
  3. GM3213235

    Mark camshaft bearing caps prior removal.

  4. Loosen the 10 exhaust camshaft bearing cap bolts (1), working from outside to inside in a spiral in steps of 1/2 up to 1 turn.
  5. GM3213237

    Remove the 10 exhaust camshaft bearing cap bolts (3).

  6. Remove the exhaust bearing front cap (2) from the cylinder head.
  7. Remove the 4 exhaust camshaft bearing caps (4) from the cylinder head.
  8. Remove the exhaust camshaft (1).
scientia non olet · About LEMON Manuals