LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Engine Front Lower Cover Installation

Engine Front Lower Cover Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the engine lower front cover sealing surfaces.
  2. GM2968026

    Apply approximately a 3 mm (0.12 in) thick bead of engine front cover sealant (1) to the engine lower front cover. In the marked areas the width has to be broadened to 4 mm (0.16 in) in order to prevent leakages. Refer to Adhesives, Fluids, Lubricants, and Sealers  for the recommended sealant.

  3. GM2966471

    Install the engine lower front cover (1).

  4. GM2966479
    CAUTION:

    Refer to Fastener Caution .

    NOTE:

    Mind the different bolt length.

    Install the 9 engine front cover bolts (1) and tighten to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals