LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2906649

    Install the drive belt tensioner (1), mind that the guide nose (3) fits into the gap (4) at the lower engine front cover.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the drive belt tensioner bolt (2) and tighten to 55 N.m (41 lb ft).
scientia non olet · About LEMON Manuals