LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Removal

Crankshaft Rear Oil Seal Removal

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3011802

    Remove the 6 short crankshaft rear oil seal housing bolts (1).

  2. Remove the 4 long crankshaft rear oil seal housing bolts (2).
  3. GM3011804

    Loosen the crankshaft rear oil seal housing (1) at the intended positions (2) with a suitable tool.

  4. Remove the crankshaft rear oil seal housing (1) in conjunction with the crankshaft rear oil seal.
  5. GM3213234

    Remove the crankshaft rear oil seal (1) from the crankshaft rear oil seal housing (2), use a suitable tool.

scientia non olet · About LEMON Manuals