Crankshaft Balancer Absorber Removal
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
- EN-956 - 1 Extension
- EN-51147 Crankshaft Holding Tool
For equivalent regional tools, refer to Special Tools .
Install the EN-51147 holding tool (1) to the crankshaft balancer absorber (2).
- Seize the EN-51147 holding tool (1) at the crankshaft balancer absorber (2) over the adjustable screws (4).
- Install the EN-956 - 1 extension (3) to the EN-51147 holding tool (1).
- Loosen the crankshaft balancer absorber bolt (5), counterhold with the EN-51147 holding tool along with the EN-956 - 1 extension.
Remove the crankshaft balancer absorber bolt (1) and the crankshaft balancer absorber (2).