LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Catalytic Converter Front Heat Shield Installation

Catalytic Converter Front Heat Shield Installation

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2906642

    Install the catalytic converter front heat shield (3).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 4 catalytic converter front heat shield bolts (2) and tighten to 9 N.m (80 lb in).
  3. Install the catalytic converter front heat shield nut (1) and tighten to 9 N.m (80 lb in).
scientia non olet · About LEMON Manuals