LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - Off Vehicle >> Automatic Transmission Flex Plate Removal

Automatic Transmission Flex Plate Removal

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools 

EN-652  Flywheel Holder

For equivalent regional tools, refer to Special Tools .

  1. GM3137473

    Install the EN-652  holder (2), lock the automatic transmission flex plate via the starter ring gear.

  2. Loosen the 8 automatic transmission flex plate bolts (1).
  3. Remove the EN-652  holder (2).
  4. GM3137474

    Remove and DISCARD the 8 automatic transmission flex plate bolts (1).

  5. Remove the automatic transmission flex plate (2).
  6. GM2906641

    Remove the crankshaft position reluctor ring (1).

scientia non olet · About LEMON Manuals