LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Measurement Procedure

Measurement Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3216206

    Install the EN-6106  adapter (2).

  2. Install the EN-498-B  gage (2).
  3. Start the engine.
  4. Check oil pressure.
  5. At idling speed, the oil pressure must be greater than 150 kPa (21.76 psi) and the oil temperature must be 85°C (185°F) or more.
scientia non olet · About LEMON Manuals