Cutting Instructions
WARNING: This page is about a different car, the 2019 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
General Instructions
- Cut the exhaust pipe with a chain type pipe cutter or a suitable tool.
- Make sure that the cutting is in an angle of 90 degrees to the exhaust pipe.
How to use the Chain Type Pipe Cutter
- Lay the cutter chain around the exhaust pipe.
- Tighten the chain until the chain is loosely around the exhaust pipe.
- Position the chain type pipe cutter onto the required cutting position at the exhaust pipe.
- Tighten the chain again so that the chain cutter is softly tensioned around the exhaust pipe.
- Make sure that the chain cuts in a line around the exhaust pipe
- Move the chain type pipe cutter back and forth around the exhaust pipe until the chain cutter could be moved easily.
- Tighten the chain again so that the chain cutter is softly tensioned around the exhaust pipe.
- Repeat the 2 previous steps until the pipe is completely cut.
NOTE:
Don't compress the exhaust pipe with the cutter.